Metal Push Button Switch
-
ELEWIND 12mm momentary metal Stainless steel 10NO bell push button switch, PM121B-10/S
Product introduction:
Metal push button, individually developed by our company,
has dozens of proprietary intellectual property rights. There are
many types, such as indicator, push button, latching push button,
illuminated push button, selector, illuminated selector, key lock
switch, emergency stop switch and buzzer.
With the effort of all the stuff, metal push buttons develop to
more series and more types, and they are gradually accepted by
well-known enterprises home and abroad (especially some large
comprehensive enterprises in Europe and America). Push buttons
are widely used in large mechanical equipment, armaria, automo
bile operation, bathroom corollary equipment, office equipment,
hotel decoration, outdoor digital product and computer equipment.
IP degree:
Comparing with plastic products, metal products not only
make improvement in IK degree, but also make progress in IP
degree. Most products have reached Ip65, and some have
achieved IP67(Soaking for short time) and even more high level.
And many clients call the products “water-proof push button”.
The Notice for Pin Welding:
Any incorrect welding operations all possibly cause damage
to plastic deformation, bad-contact switch ect. When soldering
the pin-terminals of switches and signal lamps, we should pay
attention to the following points. Because it’s easy to have the
switch damaged if improper-operation.
1.Using suitable electric soldering iron and quickening welding
speed. We suggest you use 30W electric soldering iron and finish
within 2 seconds when it reaches 320℃.
2.Using right amount of scaling powder and putting the pinterminals
downwards when soldering.
- It’s better to use connectors than direct welding
Customized Symbol:
It has been the trend to laser engrave character and sign or
customize lighting character and sign on the surface of metal push
button. Customized metal surface makes the product personalized,
and it has been a new trend.
Note:
Pls provide us the detailed part-number when you order.
Colorized crust of aluminum material is available for all above
products.
If you need the products made to order, the MOQ is 500 pieces.
The IP degree is used for the surface of the panel.
Extra customize fee is needed for the order less than 500 pieces.
Production change:
All the specificat ion and illustration are subject to change
without prior notice.
Product parameters:
PM121B-10◆/◎
Φ12mm Diameter
Switch Rating: 2A/36VDC
Contact Configuration: 1NO
Operation Type: Momentary
Terminal Type(◆): Screw Terminal / Pin Terminal(J)
Stainless steel(S)/Nickel Plated Brass(N)
IP Degree: IP65 IK08
-
ELEWIND 10mm small/mini momentary or latching type metal Stainless steel without light push button switch (PM10H-11/S)
1. key word: 10mm metal Stainless steel push button switch
2. MOQ: 1 piece
3. Head material: Stainless steel
4. Head type: High head
5.Application areas: machinery, industrial equipment, food, aviation, new energy, medical, automation, cruise ships and other industries
6. Advantage: 1NO1NC Stainless steel push button switch
7. Shipping methods: DHL/UPS/Fedex and other international express
Product introduction:
With the effort of all the stuff, metal push buttons develop to
more series and more types, and they are gradually accepted by
well-known enterprises home and abroad (especially some large
comprehensive enterprises in Europe and America). Push buttons
are widely used in large mechanical equipment, armaria, automo
bile operation, bathroom corollary equipment, office equipment,
hotel decoration, outdoor digital product and computer equipment.
While enjoying the honor and achievements,we are not arrogant and impatient, continue to improve, in order to lay a strong foundation for a wonderful tomorrow, we sincerely treat customer needs, with excellent products and quality services to win the market, continue to strive to promote the ELEWIND brand to the world. Condensing new strength, opening up a new blueprint, carrying responsibility and responsibility, carrying on the back of dreams and integrity, sailing to a more magnificent future
Our products have been sold to 30 countries around the world, and we are full of praise for their quality. We will wholeheartedly provide each customer with high-quality services and products, and look forward to cooperating with you
Product parameters:
PM10H-11/S
Φ10mm Diameter
Switch Rating: 1A/36VDC
Contact Configuration: 1NO1NC
Operation Type: Momentary or latching
Terminal Type(◆): Pin Terminal
The shell Material: Stainless steel
IP Degree: IP40
-
ELEWIND 10mm small/mini momentary or latching type metal Stainless steel with ring Illuminated light push button switch (PM10H-11E/S)
1. key word: 10mm metal Stainless steel push button switch
2. MOQ: 1 piece
3. Head material: Stainless steel
4. Head type: High head
5.Application areas: machinery, industrial equipment, food, aviation, new energy, medical, automation, cruise ships and other industries
6. Advantage: 1NO1NC Stainless steel with ring Illuminated light push button switch
7. Shipping methods: DHL/UPS/Fedex and other international express
Product introduction:
With the effort of all the stuff, metal push buttons develop to
more series and more types, and they are gradually accepted by
well-known enterprises home and abroad (especially some large
comprehensive enterprises in Europe and America). Push buttons
are widely used in large mechanical equipment, armaria, automo
bile operation, bathroom corollary equipment, office equipment,
hotel decoration, outdoor digital product and computer equipment.
While enjoying the honor and achievements,we are not arrogant and impatient, continue to improve, in order to lay a strong foundation for a wonderful tomorrow, we sincerely treat customer needs, with excellent products and quality services to win the market, continue to strive to promote the ELEWIND brand to the world. Condensing new strength, opening up a new blueprint, carrying responsibility and responsibility, carrying on the back of dreams and integrity, sailing to a more magnificent future
Our products have been sold to 30 countries around the world, and we are full of praise for their quality. We will wholeheartedly provide each customer with high-quality services and products, and look forward to cooperating with you
Product parameters:
PM10H-11E/S
Φ10mm Diameter
Switch Rating: 1A/36VDC
Contact Configuration: 1NO1NC
Operation Type: Momentary or latching
Terminal Type(◆): Pin Terminal
The shell Material: Stainless steel
The ring light color: red blue green yellow white orange
IP Degree: IP40
-
ELEWIND momentary black aluminum body colorful 1NO metal push button switch (PM121B-10/A)
Product introduction:
Metal push button, individually developed by our company,
has dozens of proprietary intellectual property rights. There are
many types, such as indicator, push button, latching push button,
illuminated push button, selector, illuminated selector, key lock
switch, emergency stop switch and buzzer.
With the effort of all the stuff, metal push buttons develop to
more series and more types, and they are gradually accepted by
well-known enterprises home and abroad (especially some large
comprehensive enterprises in Europe and America). Push buttons
are widely used in large mechanical equipment, armaria, automo
bile operation, bathroom corollary equipment, office equipment,
hotel decoration, outdoor digital product and computer equipment.
IP degree:
Comparing with plastic products, metal products not only
make improvement in IK degree, but also make progress in IP
degree. Most products have reached Ip65, and some have
achieved IP67(Soaking for short time) and even more high level.
And many clients call the products “water-proof push button”.
The Notice for Pin Welding:
Any incorrect welding operations all possibly cause damage
to plastic deformation, bad-contact switch ect. When soldering
the pin-terminals of switches and signal lamps, we should pay
attention to the following points. Because it’s easy to have the
switch damaged if improper-operation.
1.Using suitable electric soldering iron and quickening welding
speed. We suggest you use 30W electric soldering iron and finish
within 2 seconds when it reaches 320℃.
2.Using right amount of scaling powder and putting the pinterminals
downwards when soldering.
- It’s better to use connectors than direct welding
Customized Symbol:
It has been the trend to laser engrave character and sign or
customize lighting character and sign on the surface of metal push
button. Customized metal surface makes the product personalized,
and it has been a new trend.
Note:
Pls provide us the detailed part-number when you order.
Colorized crust of aluminum material is available for all above
products.
If you need the products made to order, the MOQ is 500 pieces.
The IP degree is used for the surface of the panel.
Extra customize fee is needed for the order less than 500 pieces.
Production change:
All the specificat ion and illustration are subject to change
without prior notice.
Product parameters:
PM121B-10◆/◎
Φ12mm Diameter
Switch Rating: 2A/36VDC
Contact Configuration: 1NO
Operation Type: Momentary
Terminal Type(◆): Screw Terminal / Pin Terminal(J)
Material: black aluminum
Button head color: Green red white yellow orange blue black
-
ELEWIND 22mm metal Stainless steel Ring illuminated power symbol push button switch(PM221F-11■ET/J/△/▲/◎)
Important parameter:
1. Switch rating: Ui:250V，Ith:5A
2. Mechanical life: ≥1,000,000 cycles
3. Electrical life: ≥50,000 cycles
4. Contact resistance: ≤50mΩ
5. Insulation resistance: ≥100MΩ(500VDC)
6. Dielectric strength：1,500V，RMS 50Hz，1min
7. Operation temperature: – 25 ℃~55℃ (+no freezing)
8. Operating pressure: about 4N(1NO1NC),about 7.5N(1NO1NC)
9. Operation travel: about 2.5mm
10. Torque：about 0.8Nm Max.applied to nut
11. Front panel protection degree：IP65，IK10
12. Terminal type: Pin terminal (2.8×0.5mm) -
ELEWIND 22mm metal Stainless steel or BLACK aluminum Ring illuminated push button switch(PM221F-11■E/J/△/▲/◎)
Important parameter:
1. Switch rating: Ui:250V，Ith:5A
2. Mechanical life: ≥1,000,000 cycles
3. Electrical life: ≥50,000 cycles
4. Contact resistance: ≤50mΩ
5. Insulation resistance: ≥100MΩ(500VDC)
6. Dielectric strength：1,500V，RMS 50Hz，1min
7. Operation temperature: – 25 ℃~55℃ (+no freezing)
8. Operating pressure: about 4N(1NO1NC),about 7.5N(1NO1NC)
9. Operation travel: about 2.5mm
10. Torque：about 0.8Nm Max.applied to nut
11. Front panel protection degree：IP65，IK10
12. Terminal type: Pin terminal (2.8×0.5mm) -
ELEWIND 19mm emergency mushroom latching on/off stop red Push button switch Equipment Lift Elevator (PM192F-□TS)
1. Switch rating: Ui:250V，Ith:5A
2. Mechanical life: ≥1,000,000 cycles
3. Electrical life: ≥50,000 cycles
4. Contact resistance: ≤50mΩ
5. Insulation resistance: ≥100MΩ(500VDC)
6. Dielectric strength：1,500V，RMS 50Hz，1min
7. Operation temperature: – 25 ℃~55℃ (+no freezing)
8. Operating pressure: about 4N(1NO1NC),about 7.5N(1NO1NC)
9. Operation travel: about 2.5mm
10. Torque：about 0.8Nm Max.applied to nut
11. Front panel protection degree：IP65，IK10
12. Terminal type: Pin terminal (2.8×0.5mm) -
ELEWIND 16mm metal push button switch momentary 1NO with RGB three color ring light(PM161F-10E/J/RGB/▲/◎)
Metal push button, individually developed by our company, has dozens of proprietary intellectual property rights. There are many types, such as indicator, push button, latching push button, illuminated push button, selector, illuminated selector, key lock switch, emergency stop switch and buzzer.
With the effort of all the stuff, metal push buttons develop to more series and more types, and they are gradually accepted by well-known enterprises home and abroad (especially some large comprehensive enterprises in Europe and America). Push buttons are widely used in large mechanical equipment, armaria, automo bile operation, bathroom corollary equipment, office equipment, hotel decoration, outdoor digital product and computer equipment.
-
ELEWIND 12mm metal push button switch momentary 1NO with ring light(PM121F-10E-S)
Metal push button, individually developed by our company, has dozens of proprietary intellectual property rights. There are many types, such as indicator, push button, latching push button, illuminated push button, selector, illuminated selector, key lock switch, emergency stop switch and buzzer.
With the effort of all the stuff, metal push buttons develop to more series and more types, and they are gradually accepted by well-known enterprises home and abroad (especially some large comprehensive enterprises in Europe and America). Push buttons are widely used in large mechanical equipment, armaria, automo bile operation, bathroom corollary equipment, office equipment, hotel decoration, outdoor digital product and computer equipment. -
ELEWIND 16mm high head Ring illuminated push button switch (PM162H-□■E/△/▲/◎)
1. Switch rating: Ui:250V，Ith:5A
2. Mechanical life: ≥1,000,000 cycles
3. Electrical life: ≥50,000 cycles
4. Contact resistance: ≤50mΩ
5. Insulation resistance: ≥100MΩ(500VDC)
6. Dielectric strength：1,500V，RMS 50Hz，1min
7. Operation temperature: – 25 ℃~55℃ (+no freezing)
8. Operating pressure: about 4N(1NO1NC),about 7.5N(1NO1NC)
9. Operation travel: about 2.5mm
10. Torque：about 0.8Nm Max.applied to nut
11. Front panel protection degree：IP40，IK10
12. Terminal type: Pin terminal (2.8×0.5mm) -
ELEWIND 19mm Ring illuminated Momentary latching push button 12V waterproof (PM192F-□■E/J/△/▲/◎)
PM192F-□■E/J/△/▲/◎
Φ19mm Diameter
Switch Rating: Ith:5A, Ui:250V
Contact Configuration: 1NO1NC or 2NO2NC
Operation Type: Momentary OR Latching
Terminal Type(◆): Pin Terminal(J)
The shell Material: Stainless steel or black plated Aluminum alloy
Ring light Color(△): red green blue orange white yellow
Voltage: 1.8-220V
IP Degree: IP65 IK09